| STANDARD ACCESSORIES | OPTIONAL ACCESSORIES |
| 3-jaw chuck Center$center sleever Wrenched Oil gun Operation manual Steady rest follow rest 4-jaw chuck Face plate Thread dial Longitudinal touch stop | Live center Quick change tool post Taper copy ruler 4-position longitudinal touch stop |
| MODEL | CD6250B | ||
| CAPACITIES | Max. swing over bed (mm) | 500 | |
| Max. swing over cross slide(mm) | 325mm | ||
| Center distance (mm) | 1000, 1500, 2000mm | ||
| Max swing in gap (mm) | 630 | ||
| Valid length of gap | 260mm | ||
| Bed width | 330mm | ||
| HEADSTOCK | Spindle hole | 65mm | |
| Spindle nose | ISO-C6 or ISO-D6 | ||
| Spindle taper | Metric 70mm | ||
| Spindle speeds (Number) | 22-1800rpm (15 steps) | ||
| FEEDS | Metric threads range (Kinds) | 0.5-28mm (66kinds) | |
| Inch Threads range (Kinds) | 1-56 /inch(66kinds) | ||
| Module threads range (Kinds) | 0.5-3.5mm (33kinds) | ||
| Diametral threads range (Kinds) | 8-56 DP(33kinds) | ||
| Longitudinal fees range (Kinds) | 0.072-4.038mm/rev(0.0027-0.15 inch/rev) (66kinds) | ||
| Cross feeds range (Kinds) | 0.036-2.019mm/rev(0.0013-0.075 inch/rev) (66kinds) | ||
| Rapid traveling speed of carriage | 5m/min (16.4ft/min) | ||
| Leadscrew size: Diameter/Pitch | 35mm/6mm | ||
| CARRIAGE | Cross slide travel | 300mm | |
| Compound rest travel | 130mm | ||
| Cross-section size of toolshank | 25*20mm | ||
| TAILSTOCK | Taper of tailstock sleeve | Morse No.5 | |
| Diameter of tailstock sleeve | 65mm | ||
| Travel of tailstock sleeve | 120mm | ||
| MOTOR | Main drive motor | 4.0kw or 5.5kw or 7.5kw |
|
| Coolant pump motor | 0.125kw | ||
| Rapid traverse motor | 0.12kw | ||
| Packing Size (L*W*H) (mm) | |||
| Center Distance 1000mm | 2420*1150*1800 | ||
| 1500mm | 2920*1150*1800 | ||
| 2000mm | 3460*1150*1800 | ||