Q1350 Heavy Duty Oil Country Lathe

This lathe meets the special requirements of users in the petroleum, geological, mining and chemical industries, and in agricultural irrigation and drainage, it is able to cut various straight and taper pipe threads of union joints, drill rods, casting pipes, drain pipes, well castings and warter pump pipes more economically and efficiently as compared with the engine lathe, however, it may serve as an engine lathe to cut various metric, with worth and module threads, shafts and disks.

1. The machine is equipped with a tapering unit which can work out a ±1:4 taper. 2. It is able to cut both metric and threads without changing the translating gear. 3. The dripping worm in the apron can protect the mechanisms of the lathe automatically. 4. The guide way is hardened and finely finished. 5. The geat power of the machine is competent at heavy load and power cutting. 6. The floor center rest can be moved freely as required by the user. 7. The center rest is provided with an adjustable clamp unit for long pipes, greatly reducing intensity of labor. 8. The double 4-jaw chucks offer free clamp of both short and long pipes.

MODEL	Q1313	Q1319—1A	Q1327	Q1343	Q1350
Bed width	490	490	750	750	750
Turning diameter over bed (max.)	630	630	1000	1000	1200
Max.Turning diameter over carriage	350	350	610	610	705
Max. diameter of pipe (manual chuck)	126	193	260	426	510
Turning length (Max.)	1500	1500	1500	1500	1700
Spindle bore	130	200	270	440	520
Spindle speed steps	18 steps	12 steps	12 steps	9 steps	9 steps
Range of spindle speed	12-640 r/min	24-460 r/min	16-380 r/min	4.9-180 r/min	6-205 r/min
Inch threads (T.P.I)	28～2/40		4～12/6	24～2/17	28-2/22
Metric threads（mm）	1～14/24		2～8/4	1～12/16	1-15/23
Main motor power	11kw		18.5kw	22 kw
Machining length of taper scale	500 mm		1000 mm
Rapid travel of tool post	6000mm/min

Q1350 Heavy Duty Oil Country Lathe

Products Details

Featured Products

Contact us