1.The base, sliding seat, worktable, column, spindle box and other main foundation parts are made of HT300 cast iron;  The base is a box-type structure, and the compact and reasonable symmetrical reinforcement structure ensures the high rigidity and the performance of bending and shock absorption of the foundation parts.  A-type bridge column and internal grid bar, effectively ensure the rigidity and precision of z-axis cutting force;  The base parts are molded with resin sand and treated with aging, which guarantees the stability of the machine tool's long-term performance.     2, X, Y, Z guide rail is Taiwan HIWIN or PMI company heavy-duty linear ball guide rail, with high speed, high rigidity, low friction, low noise, low temperature rise change and other characteristics, with automatic forced lubrication, improve the precision life of the machine tool;     3.Z-direction guide plus nitrogen balancing device to ensure smooth and stable movement of headstock;  Z-direction drive motor with loss of power braking device;     4, X, Y, Z three directions feed using high precision and high strength inner circulation double nut prepressure big lead ball screw, high feed speed;  The drive motor is directly connected with the screw through the elastic coupling, and the feed servo motor directly transfers the power to the high-precision ball screw. There is no backlash to ensure the positioning accuracy and synchronization of the machine tool.     5, adopt high speed, high precision, high rigidity spindle unit, strong axial and radial bearing capacity, the highest speed can reach 8000rpm;     6, the main shaft adopts the central blowing structure, when the main shaft is loose knife, the central high pressure gas is quickly used to clean the inner cone of the main shaft, to ensure the precision and life of the tool clamping;     7, X, Y, Z three direction guide rail, lead screw are used protective device, ensure the clean screw and guide rail, ensure the machine tool transmission and motion precision and life;   8, machine tool external protection with full protection structure design, easy to operate, safe and reliable, beautiful and generous;     9, reliable centralized automatic lubrication device, timed, quantitative automatic intermittent lubrication of the machine tool each lubrication point, lubrication time can be adjusted according to the working condition;     10, the use of Taiwan professional manufacturers to produce 24 disc type knife library (optional), accurate tool change, short time, high efficiency, after millions of times of operation test, meet the reliability requirements;  With damping structure, can reduce the impact of movement, ensure the service life of knife library;  Pneumatic drive, easy to use, the shortest path tool change;    

1. Simple oil-water separation device can separate most of the lubricating oil collected from the coolant to prevent the rapid deterioration of the coolant, which is beneficial to environmental protection;  

 

1. The machine operating system adopts ergonomic principle, and the operation box is independently designed, which can rotate and operate by itself Convenient.

ITEM	unit	VMC1160
Table size	mm	1200x600
Table maximum load	kg	800
T slot(number-width-pitch)		5-18-160
X axis travel	mm	1100
Y axis travel	mm	610
Z axis travel	mm	620
Distance between spindle center and column surface	mm	650
Distance between spindle noseand worktable surface	mm	120-720
X/Y axis max.rapid traverse	m/min	36
Z axis  max.rapid traverse	m/min	24
Cutting feed	mm/min	1~10000
Spindle speed	r/min	80-8000
Spindle taper		BT40
Main motor power	kw	18.5
X/Y/Z guide rail form		3 axis linear rail
positioning accuracy	mm	±0.01mm
Repeat positioning accuracy	mm	±0.005mm
Tool magazine capacity(standard)		24
Max.tool dia.(adjoin/apart)	mm	80/150
Max.  tool length	mm	300
Max.tool weight	kg	6
Machine dimension	mm	3300×2550×2800
Machine weight	kg	6900