Aesthetic and elegant modeling. High efficiency for automatic knife changing. X/Y/Z axes adopt rectangular guide way, The spindle frame is used in the lathe pedestal to increase its stability and stiffness. The machine has a good rigidity and strong vibration resistance. It has a good chip removal performance.   1, base, slide, table, column, spindle box and other main basic parts are HT300 cast iron; The base is box-type structure, and the compact and reasonable symmetrical bar structure ensures the high rigidity and flexural and shock absorption performance of the base parts. A-type bridge straddling column and internal grid bar, effectively ensure the rigidity and accuracy of Z-axis strong cutting; The base parts are made of resin sand and aged treatment, which guarantees the stability of the long-term performance of the machine tool. 2, X, Y, Z guide are Taiwan silver heavy duty linear ball guide, with fast speed, high rigidity, low friction, low noise, low temperature rise and change characteristics, with automatic forced lubrication, improve the accuracy of the machine life; 3, Z to the rectangular guide rail with counterweight balance, to ensure that the movement of the headstock smooth and stable; The z-drive motor has a power loss braking device; 4, X, Y, Z three direction feed using high-precision and high-strength internal circulation double nut prepressure large lead ball screw, feed speed is high; The drive motor is directly connected with the lead screw through the elastic coupling, and the feed servo motor directly transfers the power to the high-precision ball screw, without back backlash, to ensure the positioning accuracy and synchronization of the machine tool; 5, the use of high-speed, high-precision, high-rigidity spindle unit, axial and radial bearing capacity is strong, the maximum speed up to 8000rpm; 6, the main shaft adopts the center blowing structure, and the central high pressure gas is used to clean the inner cone of the main shaft quickly when the main shaft is loose, ensuring the accuracy and life of the tool clamping; 7, X, Y, Z three direction guide, lead screw are using protective devices to ensure the lead screw and guide clean, to ensure the transmission and movement of the machine tool accuracy and life; 8,Machine tool external protection adopts full protection structure design, easy to operate, safe and reliable, beautiful and generous; 9, the use of reliable centralized automatic lubrication device, timing, quantitative automatic intermittent lubrication of each lubrication point of the machine tool, can adjust the lubrication time according to the working condition; 10, the processing center uses Taiwan professional manufacturers to produce 12 hats), accurate tool change, short time, high efficiency, after millions of running tests, in line with the reliability requirements; With damping structure, it can reduce the impact during movement and ensure the service life of the tool store; Pneumatic drive, easy to use, shortest path tool change; Note: Tool library is optional configuration 11,The oil-water separation device can separate most of the collected lubricating oil from the coolant to prevent the rapid deterioration of the coolant, which is conducive to environmental protection; 12, the machine operating system adopts the ergonomic principle, the operation box is independently designed, can rotate itself, easy to operate.

Model	XH7125
Main motor power	2.2kw
Highest spindle speed	6000rpm or 8000rpm
X/Y/Z to the motor torque	6/6/7.7N.M
The spindle taper hole	BT30(optional:ISO40)
Table size	900x250mm
X/Y/Z axis travel	450x260x380mm
Distance between spindle center and surface column	330mm
The distance of spindle end face to the workbench	50-430mm
Rapid movement(X/Y/Z)	6/5/4m/min
T-slot	3/14/35
Table load	250kgs
Positioning accuracy	0.02mm
Repeat posotioning accuracy	0.01mm
Machine tool appearance size(L x W x H)	1200x1500x2100mm
Ball screws diameter axis X Y and Z	25/25/32 mm
Net.Weight	1800kgs